LYSAM-Ms Portable Mini Automatic Water Sampler
Utility Potable Mini Sampler
LYSAM-Ms is a portable mini automatic water sampler that uses a vacuum water sampling method. Its compact size, measuring 400mm in diameter and 630mm in height, can store 24 500mL bottles or 1000mL bottles (optional). It is easy to carry and can even be installed inside a manhole. The controller features a 16-character x 8-line Japanese display. It also records status changes (e.g., from "standby" to "operating"), events such as water sampling, and the status of external input signals as an event log, which can be retrieved on a USB memory stick.
Main function
- Timing of water collection and method of distributing the sample into bottles
Automatic water sampling by programming - Setting the amount of water to be collected at one time
- Starting the water sampling program by external input signal(option)
- Controlling the progress of the water sampling program using external input signals (option)
- Contact output (external output) for alarm status, operation status, etc. of this device (optional)
- Save three water sampling settings
- Event Log
- SDI-12 communication (optional)
specification
Water sampling target
General sewage, rainwater, industrial wastewater, sludge, rivers, lakes, etc.
Main unit
| Main material | Made of resin |
| size | φ400×H630 (excluding protrusions) |
| display | VFD (16 double-byte characters x 8 lines) with sleep function |
| Ambient temperature | 0 to 50°C |
| Ambient humidity | 25 to 95% RH (no condensation) |
function
| Water sampling method | Diaphragm pump type (vacuum water sampling) |
| Water collection speed | 0.9m/s or more with horizontal pull of 3m and lifting height of 6.2m |
| Water sampling accuracy (reproducibility) | Within ±2% |
| Water intake head | V1: 8.5m (pump capacity) V3: 20m (double suction) |
| Measuring part | 500mL chamber and variable volume top |
| Sample bottle | 500mL x 24 bottles, 1L x 24 bottles (optional), 10L x 1 bottle (optional) |
| Water sampling hose(sampling line) | Soft PVC black braided hose ID9.5 x OD16 connector with strainer |
| temperature display | Thermistor type water temperature sensor (optional) |
| Data logger | Records water sampling time, analog instantaneous value, whether or not there was a water sampling error, water temperature at the sampling point, etc. (optional), and collects data on a USB memory stick |
| input | Programming with touch keys |
| timer | Delay or real-time timer |
| Water sampling mode | Time proportional water sampling, flow proportional water sampling (analog, SDI-12 (optional)), pulse proportional water sampling (optional), irregular interval water sampling |
| Water sampling control | External water sampling control (analog, contact, SDI-12 (optional), water temperature (optional)), water sampling control by day of the week |
| Water sampling interval | Time proportional water sampling: 1 to 9999 (unit: min) Flow proportional water sampling: 1 to 99999 (unit: m3) Pulse proportional water sampling: 1 to 9999 (unit: pulse) |
| Number of divided water samples | 2 to 999 times |
| Distributed water sampling | Composite water sampling, single water sampling, multi-sample water sampling, multi-bottle water sampling, timer step water sampling, auto-drain water sampling (optional) |
| Cycle Settings | Water collection cycle and retry count settings |
| Temperature recording function | Logging of water temperature at each sampling point (optional) |
Analog Signal Input
DC4 to 20mAflow rate, water quality, etc. (optional)
Abnormal signal input
No-voltage contact signal (optional)
power supply
DC12V8A or AC100V 50/60Hz (optional)
Body mass
Approximately 17kg
Control Panel
Standard accessories
| Water collection bottle | 500mL x 24 bottles (stored in the main bottle case) |
| Water sampling hose | 8m (with connector and strainer) 1 set |
| battery | 1 piece |
| Battery charger | 1 unit |
| Battery cable | 1 pair |
| Battery retaining rubber | 1 pair |
| rubber seal | 1 pair |
option
- Sample bottles (500mL x 24, 1L x 24, 10L x 1, etc.)
- Strainer (SUS304)
- Water quality meter/multipurpose sensor
- SDI-12 communication capability
- Auto-drain water collection function
- Intermediate tank lifting device
- Multi-timer function
- External Input/Output Cable
- Hose cleaning function
- Suspension set (for installation in manholes)
- Water sampling start level detector
- Water Temperature Sensor
- rain gauge
- High lift specification (20m)
- 2-mode water sampling function
- Contact output function
- Anti-siphon function
- AC/DC converter
- Remote monitoring and control system
Installation conditions
Since the LYSAM series uses a vacuum water sampling method, the sampling point must be installed at a lower position than the chamber. Install the water sampling hose so that it does not slope backward from the chamber to the sampling point.
Disposal
Please contact us for a fee. The device will be disposed of via our company, and the battery will be disposed of by the manufacturer (which can be via our company).
packing
We use only pulp and staples for packaging, and do not use materials that are expected to produce toxic gases when incinerated.
Recycled Design
The LYSAM series aims to create environmentally friendly products, and is mindful of reducing, reusing, and recycling.
*Please note that specifications may be changed without notice for improvement purposes.
*The shape and performance of the product may change depending on the installation environment, construction conditions, etc.