CUSTOM SAMPLER SYSTEM

overview

LYSAM-X is a custom-made sampler.

*Please contact us regarding special water sampling methods.

Main function

1. Time-flow proportional water sampling
2. Water sampling in case of an emergency
3. Multi-bottle sample collection
4. Timer cycle setting
5. Discrete Water Sampling
6. Composite Water Sampling
7. Refrigerate and store collected water samples

CUSTOM

1. Remote monitoring and control systemControl method: PC, sequencerCommunication functions: LAN, optical fiber, etc.
2. On-site stand-alone system
3. Water temperature sensor
4. Water level sensor
5. Water quality meter/multi-parameter water quality sensor
6. High head function
7. Auto-drain water collection function
8. Anti-siphon function
9. Sampling line (IDφ12.0)
10. Specifications to prevent salt damage, etc.
11. Hose cleaning function
12. Strainer cleaning function

specification

Water sampling target

General sewage, rainwater, industrial wastewater, sludge, rivers, lakes, etc.

Main unit

Main material	SUS304 or SUS316
display	TFT color touch panel
Ambient temperature	0 to 50°C
Ambient humidity	25 to 95% RH (no condensation)

function

Water sampling method	Diaphragm pump type (vacuum water sampling)
Water collection speed	0.9m/s or more with horizontal pull of 3m and lifting height of 6.2m
Water sampling accuracy (reproducibility)	Within ±2%
Water intake head	V1: 8.5m V2: 9.5m (single suction) V3: 20m V4: 30m (double suction) V5: 18m (hybrid)
Measuring part	500mL chamber and variable volume top (1L and 2L are optional)
Water sampling hose(sampling line)	Brown vinyl mesh hose ID φ9.5 x 10m with connector and strainer
Data logger	Records water sampling time, water temperature (optional), analog signal level, water sampling mode, whether or not there was a water sampling error, etc.
timer	Delay Timer/Real Timer
Water sampling mode	Time proportional water sampling, flow rate proportional water sampling by external signal, water sampling in case of abnormality (analog signal, contact signal), irregular interval water sampling
Water sampling control	External water sampling control (analog, contact, water temperature (optional)) Water sampling control by day of the week Irregular interval water sampling
Water sampling interval	Time proportional: 1 to 9999 (unit: min) Flow proportional: 1 to 99999 (unit: m3)
Number of divided water samples	2 to 999 times
Distribution method	Composite water sampling, single water sampling, multi-sample water sampling, multi-bottle water sampling, day-step water sampling, auto-drain water sampling (optional)
Cycle Settings	Water collection cycle and retry count settings
Temperature recording function	Logging of water temperature at each sampling point (optional)

Analog Signal Input

DC4~20mA, etc.

Contact signal input

No-voltage contact signal

power supply

AC100V 50/60Hz

Dimensions

format	Outdoor stationary stand-alone type (double controller function)
Communication Function	Remote monitoring and control via wireless LAN
Water sampling mode	Central and local operation modes

Standard accessories

Water collection bottle	2L x 24 bottles (stored inside the bottle case)
Water sampling hose	10m (with connector and strainer) 1 set
Composite Bottle	30L x 1 bottle
rubber seal	1 pair

Installation conditions

Since the LYSAM series uses a vacuum water sampling method, the sampling point must be installed at a lower position than the chamber. Install the water sampling hose so that it does not slope backward from the chamber to the sampling point.

Disposal

Please contact us for a fee. *Refrigerant recovery is also available.

Recycled Design

The LYSAM series aims to create environmentally friendly products, and is mindful of reducing, reusing, and recycling.*Please note that specifications may be changed without notice for improvement purposes.*The shape and performance of the product may change depending on the installation environment, construction conditions, etc.