Utility Sampler

LYSAM-Rs is a portable, refrigerated automatic water sampler that uses a vacuum water sampling method. Casters are standard equipment. The controller features a 16-character x 8-line Japanese display. Events such as status changes (e.g., from "standby" to "operating"), water sampling events, and external input signal status are recorded in an event log, which can be retrieved on a USB memory stick.

Main function

1. Timing of water collection and method of distributing the sample into bottles
　Automatic water sampling by programming
2. Setting the amount of water to be collected at one time
3. Starting the water sampling program by external input signal　(option)
4. Controlling the progress of the water sampling program using external input signals　　(option)
5. Contact output (external output) for alarm status, operation status, etc. of this device (optional)
6. Save three water sampling settings
7. Event Log
8. SDI-12 communication (optional)
9. Refrigerate and store collected water samples

specification

Water sampling target

General sewage, rainwater, industrial wastewater, sludge, rivers, lakes, etc.

Main unit

Main material	AES resin (control part) SUS304 (standard) SUS316 (option)
size	W740×H1470×D750 (excluding protrusions)
display	VFD (16 double-byte characters x 8 lines) with sleep function
Ambient temperature	0 to 50°C
Ambient humidity	25 to 95% RH (no condensation)

function

Water sampling method	Diaphragm pump type (vacuum water sampling)
Water collection speed	0.9m/s or more with horizontal pull of 3m and lifting height of 6.2m
Water sampling accuracy (reproducibility)	Within ±2%
Water intake head	V1: 8.5m (single suction) V2: 9.5m (single suction) V3: 20m (double suction)
Measuring part	500mL chamber and variable volume top (1L and 2L are optional)
Sample bottle	2L x 24 bottles, 30L x 1 bottle
Water sampling hose(sampling line)	Soft PVC black braided hose ID9.5 x OD16 connector with strainer
temperature display	Thermistor type water temperature sensor (optional)
Data logger	Records water sampling time, analog instantaneous value, whether or not there was a water sampling error, water temperature at the sampling point, etc. (optional), and collects data on a USB memory stick
input	Programming with touch keys
timer	Delay or real-time timer
Water sampling mode	Time proportional water sampling, flow proportional water sampling (analog, SDI-12 (optional)), pulse proportional water sampling (optional), irregular interval water sampling
Water sampling control	External water sampling control (analog, contact, SDI-12 (optional), water temperature (optional)), water sampling control by day of the week
Water sampling interval	Time proportional water sampling: 1 to 9999 (unit: min) Flow proportional water sampling: 1 to 99999 (unit: m3) Pulse proportional water sampling: 1 to 9999 (unit: pulse)
Number of divided water samples	2 to 999 times
Distribution method	Composite water sampling, single water sampling, multi-sample water sampling, multi-bottle water sampling, timer step water sampling, auto-drain water sampling (optional)
Cycle Settings	Water collection cycle and retry count settings
Temperature recording function	Logging of water temperature at each sampling point (optional)

Analog Signal Input

DC4 to 20mAflow rate, water quality, etc. (optional)

Abnormal signal input

No-voltage contact signal (optional)

power supply

AC100V 50/60Hz

Power consumption

Standard 500W, high head 650W(rush current 50Hz 23A, 60Hz 22A)

Body mass

Approximately 150kg

Standard accessories

Water collection bottle	2L x 24 bottles (stored inside the bottle case)
Water sampling hose	8m (with connector and strainer) 1 set
Composite Bottle	30L x 1 bottle
rubber seal	1 pair

option

• Sample bottles (1L x 24 bottles, 2L x 24 bottles, 30L x 1 bottle, etc.)
• Chamber and top (1L, 2L)
• Water sampling start level detector
• Water Temperature Sensor
• rain gauge
• High lift specification (20m)
• 2-mode water sampling function
• Contact output function
• Anti-siphon function
• Polyurethane paint
• Fixed channel base

• Strainer (SUS304)
• Water quality meter/multi-parameter sensor
• SDI-12 communication capability
• Auto-drain water collection function
• Intermediate tank lifting device
• Multi-timer function
• External Input/Output Sensors
• Hose cleaning function
• AC200V specification
• Remote monitoring and control system

Installation conditions

Since the LYSAM series uses a vacuum water sampling method, the sampling point must be installed at a lower position than the chamber. Install the water sampling hose so that it does not slope backward from the chamber to the sampling point.

Disposal

Please contact us for a fee. *Refrigerant recovery is also available.

Recycled Design

The LYSAM series aims to create environmentally friendly products, and is mindful of reducing, reusing, and recycling.*Please note that specifications may be changed without notice for improvement purposes.*The shape and performance of the product may change depending on the installation environment, construction conditions, etc.